Here at BestDamescusKnife, we are enthusiastic about making your cigar smoking experience memorable. By our reviews, we expect to share our experience of the greatest choices currently in the store for your budget. Today we will be seeing at the 10 best cigar cutter that we have narrowed down from the 30 we tested! If you are doubtful if you would favor a cutter or a punch then review out this post here.

Guide: HOW TO CUT A CIGAR? 

You might assume that cutting off the tip-off of a cigar is a simple method but even the most skilled cigar smokers will make an unusual bad cut and conquer their smoking pleasure. A rough cut can leave tobacco in the mouth and a loosening of the inside of the cigar while cutting too low or shallow can be the distinction between an unraveling cap or a harsh feeling on the lips individually.

If you are applying a guillotine cutter or cigar scissors, the intention is to cut just before the cap so that you have at least 3 to 4mm continuing. This will provide you a better possibility of evading any unraveling. Furthermore, any cut should be performed immediately and in one step if you are seeing for the best outcomes.

A piece of big advice though, if you are attempting to cut a figurado, you will not be capable to use a guillotine or scissors and will rather than to use a V-cutter, punch cutter, or go the Dirty Harry route of biting off the end.

How Many Types Of Cigar Cutter Are Out There? 

Well, that torment device that we discussed briefly is the most fundamental and more generally utilized type of cigar cutter and that is known as a straight or guillotine cutter. These are accessible with either a single or double blade, with the latter being famous for giving the most reliable type of cut. It has two blades from different directions just look to give a clean-cut as a consequence.

Other famous cutters combine V-cut or wedge cutters which serve to stop cutting too deep, punch cutters which punch a hole into the cap of the cigar, professional cigar scissors that operate as you might demand, and the rather scary but innovative Shuriken cutter that has 6 blades. The latter is a reasonably discovery and it cuts six equal slits into the cap of a cigar in the most torture-Ristic ways possible.

How Can You Take Care Of  The Cigar Cutters

After a continued period utilizing the same cigar cutter, you might begin to see that its production starts to fall. This could be from the cuts not being as clean, the tops of your cigars managing to shred rather than being cut off accurately, the work of the cutter is not as smooth and becomes hard to open and close, or that some gunk development is starting to look on the blades.

In the most maximum of these cases, your cigar cutter will require little more than a regular clean. This can be done by cleaning alcohol on the blades to exclude any tar buildup. Moreover, to help with the action of the cutter, grab a small amount of graphite lubricant and put it on either side of the blades. Follow that up by frequently opening and closing the cutter so that the lubricant reaches inside and you will instantly notice a marked enhancement in the performance of the cutter.

If your blades require sharpening, the single real way to do this is to get in touch with the producer of the cutter to see if they will do this for you. Some of the cigar cutter brands will be happy to have this done but it may get several weeks before you get your cutter back.

---

Best Quality Cigar Cutter Reviews

Among various options, it can be difficult to pick the Cigar Cutter for your lifestyle. In this article, we at BestDamascussKnife will give you the guide on the Cigar Cutter. Here is a list of some of the best choices out there to assist you to make a choice.

Here is the list of top 10 Best Cigar Cutter:

• ALASKA BEAR® – Cigar Cutter Stainless Steel Guillotine
• Colibri V-Cut Cigar Cutter – Black
• Cigar Cutter Stainless Steel Guillotine Smooth Double-Cut Blade
• Vertigo Victory V-Cut Cutter
• Blinkeen® Cigar Cutter-Stainless Steel and Kirsite Cigar Cutters-Double Blade Guillotine
• 2020 Cigar Cutter Built-in Two Cigar Punch
• OYHBO Cigar Cutter Stainless Steel Guillotine Style
• Quality Importers Trading Co. Quad Table Cigar Cutter
• CIGARLOONG Cigar Cutter
• CIGARLOONG Cigar Cutter Stainless Steel

---

Editor’s Note: We will update this list as more Cigar Cutter hits the market.

---

	Product	Manufacturer	Shop
	ALASKA BEAR® - Cigar Cutter Stainless Steel Guillotine	ALASKA BEAR
	Colibri V-Cut Cigar Cutter - Black	Colibri
	Cigar Cutter Stainless Steel Guillotine Smooth Double-Cut Blade	Anntuk
	Vertigo Victory V-Cut Cutter	Vertigo
	Blinkeen® Cigar Cutter-Stainless Steel and Kirsite Cigar Cutters-Double Blade Guillotine	BLINKEEN
	2020 Cigar Cutter Built-in Two Cigar Punch	Camlinbo
	OYHBO Cigar Cutter Stainless Steel Guillotine Style	OYHBO
	Quality Importers Trading Co. Quad Table Cigar Cutter	Quality Importers
	CIGARLOONG Cigar Cutter	C CIGARLOONG CIGARLOONG
	CIGARLOONG Cigar Cutter Stainless Steel	C CIGARLOONG CIGARLOONG

---

1: ALASKA BEAR® – Cigar Cutter Stainless Steel Guillotine

Features

• Double Cut Blade
• Black
• Gift Pouch

PROS

1. It is made by Brushed stainless steel, custom-built design by Alaska Bear brands.
2. Great craftsmanship and solid production.
3. The Self-sharpening double blades and cuts cigars neatly and with accuracy.
4. The hole diameter is 0.892 in. (22.66 mm), for all sizes up to 60 gauge.
5. It Arrives in a cool gift bag, to preserve and guard the cutters

CONS

• It has no cons.

---

2: Colibri V-Cut Cigar Cutter – Black

PROS

1. It has the feature of Spring-Loaded release
2. The Ergonomic design, v-shaped cutter, stainless steel blade
3. It has a Two-year warranty and a gift box included

CONS

• It has no cons.

---

3: Cigar Cutter Stainless Steel Guillotine Smooth Double-Cut Blade

PROS

1. The Great craftsmanship and reliable development
2. The Self-sharpening Brushed stainless steel double blades, Cuts cigars neatly and with accuracy
3. The hole diameter is 0.9 inches. Operated well on all sizes up to 60 ring gauge cigars
4. It is created with a suitable size. Very comfortable to carry with

CONS

• It has no cons.

---

4: Vertigo Victory V-Cut Cutter

PROS

1. It is a Double Action Cutter-V-Shaped Cut
2. It is made of Plastic with Stainless Steel
3. It can Fit up to 62 Ring Gauge
4. Its color is Black
5. It is very Lightweight

CONS

• It has no cons.

---

5: Blinkeen® Cigar Cutter-Stainless Steel and Kirsite Cigar Cutters-Double Blade Guillotine

PROS

1. The Premium Metal Construction Cigar Cutter: The Kirsite and 420J2 stainless steel – shining and brighter in super solid production.
2. Cut and Lock System – It gives an easy hold and cut easily.
3. Classic Double Blades – It is Inverted by a stainless steel blade, cuts small and large ring gauge cigars, a clean cut.
4. PACKING: Beautiful gift box packaging– It is the best gift for cigar lovers, customized velvet pouch-better shield for a cigar cutter.
5. After Sales Service: It has 6 months warranty

CONS

• It has no cons.

---

6: 2020 Cigar Cutter Built-in Two Cigar Punch

Features

• Silver Color Chrome Finish
• Self Sharpening Blades
• Stainless Steel
• Black Gift Box 
• Suitable for Travel 
• Smoking Accessories
• Silver

PROS

1. The Classic design and the best cigar scissors for everyone.it is better than ancient cigar scissors.
2. The Excellent craftsmanship and the solid construction.this is a new cigar mold.stainless steel cigar cutter.
3. It Arrives in a fashionable gift bag to save and protect the cutters.you will get a good cigar cutter.
4. Its size is 2.4 x 1.7 x 0.5 inch.just 0.3lb。It is light and comfortable to carry outdoors or travel
5. It is perfect for gifts.

CONS

• It has no cons.

---

7: OYHBO Cigar Cutter Stainless Steel Guillotine Style

Features

• Double Blades Cutter
• Perfect for Most Cigars
• Gold

PROS

1. Premium Stainless Steel: This cigar cutter is built of heavy-duty 420J2 Stainless Steel, superior craftsmanship, Polished, high-grade beauty appearance, and strong solid production.
2. Double Blades Guillotine: The Self-sharpening double blades make a clean straight cut.
3. Design: Its hole diameter is 0.98 inches (25 mm), operates great on all sizes up to 60 ring gauge cigars.
4. Usage: It suits well between your finger and your thumb and is simple to close, the handle is very polished and your fingers will not be hurt in any case.
5. Convenience：Makes a great gift for birthdays

CONS

• It has no cons.

---

8: Quality Importers Trading Co. Quad Table Cigar Cutter

Features

• Brushed Finish
• 52 and 60 Ring Gauge Straight Cutters
• 52 and 58 Ring Gauge V-Cutters
• Model 9305

PROS

1. It is made with Surgical stainless steel
2. It has 4 different cutting options
3. It has 2 straight cutters and 2 v-cutters
4. Steel lever for an excellent cut

CONS

• It has no cons.

---

9: CIGARLOONG Cigar Cutter

Features

• Black
• Engraved
• Stainless Steel
• Double Blades
• Cigar Guillotine

PROS

1. CUT DIAMETER: Its hole is up to Ring Gauge 50 (20mm)
2. MATERIAL: The Body Using Copper Material, Carved Fine Flower Pattern with the Soft Touch Easy to Feel
3. FEATURE: The Self-Sharpening Double Blades and Cuts Cigars clearly and accurately
4. OCCASION AND USER: It is a Great Gift for All Cigar Lovers.

CONS

• It has no cons

---

10: CIGARLOONG Cigar Cutter Stainless Steel

Features

• Bronze
• Engraved
• Double Cut Blade
• Color: Silver1

PROS

• CUT DIAMETER: Its hole is up to 50-55 Ring Gauge
• FEATURE: The Self-Sharpening Double Blades and Cuts Cigars Clean and Precision
• MATERIAL: The Body Using Copper Material, Carved Fine Flower Pattern with the Soft Touch Easy to Feel
• CARVED PULL RING: Place your Thumb and Forefinger into Two Rings, Then Pull Hard, Cigar and Scissors at 90 Degree Angle, Cuts cigars Clean and with Precision

CONS

• It has no cons.

---

Suggestions on Getting the Best Cigar Cutter

1: Cut Type

1: Dual Blade Guillotine

There is no most suitable type of cigar cutter for everyone, but this is seemingly the most popular, the dual blade guillotine cuts a cigar from both sides in one fluid motion. These appear in a class of materials and cost ranges, from plastic to stainless steel. The cutters that cigar markets provide for free or extremely low cost are frequently double blade guillotines. They additionally come in a single blade type and are frequently spring-loaded. These work unusually well for torpedoes where a cigar punch or V cut would not do the job.

2: V-Cut

More popular, the V-cut cigar produces a wedge or V shape at the top of the cigar. These would not work for a cigar with a tapered end but are excellent for just about any other variety. They additionally serve to be shorter and more convenient to carry.

3: Scissors / Multi-Tool

It is Familiarized by the Xikar MTX Cutter, scissor, or multi-tool cutters that give an outstanding clean-cut powered by lots of leverage. It is Excellent for the keychain, many men add this as part of their wardrobe or every day carry. They also make fabulous gifts.

2: Gauge Of  The Cutter

The Cigar cutters, like cigars, appear in a class of ring gauges, usually from 20 to 60. Usually speaking, you would not be receiving cigars that would not fit into the standard cutters. Though, if you experience a rather large ring gauge cigar, you will have to be assured you take a product that cuts well.

3: Cigar Type You Want To Cut With Cutter

The Cigars are rolled with distinctive cigar tips. Usually, most maximum cutters will do the task for any kind. Though, if you are a special fan of a particular type of cigar, you will need to get a cutter that works. Straight edges and a rounded head classify Parejo cigars. Figueredo, on the other hand, is any cigar that does not fall into the parejo category. These involve torpedos – those with a tapered end, perfectos – two tapered ends, and the entire world of other options.

4: Spring Loaded

An essential concern, especially for larger ring gauge cigars, a spring-loaded cutter is an excellent way to assure you take a smooth and steady cut on your smoke. A flawlessly straight cut further assures that the tobacco does not unravel.

5: Size Of  The Cutter

There are two primary sizes when it becomes to cigar cutters. A small cutter can be taken comfortably in your pocket or applied around the house. These themselves come in a kind of size. A tabletop cutter, on the other hand, is ideal for producing an ambiance and is placed on the bar or the patio of your home.

6: Price Of  The Cutter

The price differs extensively. You can take a plastic, double guillotine cutter for some dollars – these are quite helpful. If, though, you enjoy smoking or need to build a delightful adventure for guests, think a higher quality piece. The average prices here will be around $50, particularly from well-respected brands.

7: Warranty

The big-name brands may give a lifetime warranty, giving extra peace of mind for your purchase. Make sure to review the website before buying – even a limited warranty is better than nothing.

The Cigar Cutters vs. Cigar Punch vs. Knife, Scissors, And Teeth

1: Cigar Cutter

A class of cigar cutters is able of making an S or V cut in your cigar to enable you to attract the smoke by the tobacco. The chief reason to apply a cigar cutter is to have a clean, sharp blade pass through the tobacco without pulling or stretching the delicate leaves within. A cigar cutter is additionally the most affordable and most comfortable way to clip a cigar for smoking. The Cigar cutters too make a great gift.

2: Cigar Punch

A punch works exactly like a three-hole punch and is able of moving neatly through the exterior layer of a cigar. The Punch or cutter gets down to individual choice. Note: you would not be capable to use a punch for cutting your torpedo-shaped smokes.

3: Knife, Scissors, or Teeth

Other than the utility scissors specially created for cutting your cigar, steer clear of them, along with knives and your teeth. Of course, if you are in pressure, anything will do, but you run a high chance of ruining the cigar as opposed to applying a quality cutter to make a clean clip. You will see that all of these choices are far more complicated.

Frequently Asked Questions About Cigar Cutter

Q: Which cigar cutter is the best?

The one that operates fittest for you. You will need to think if you like owning a cutter handy in your pocket or you would like to have something on your table. Then, focus on cut quality. Numerous cutters can now do both a V and Scut, but the right cutter will do what you need well.

Q: How much do you cut off a cigar?

The law of thumb is about 1/16 of an inch. You can simply eyeball this by noting where the shoulder of the cigar is – this is where it rises to level out. Clip just before this area.

Q: Can a cigar cutter cut off a finger?

It can. Be very careful with cigar cutters of any sort. Use any sharp thing as if it can remove a beloved digit. A guillotine cutter, particularly, can create severe injury.

Q: Can you cut a cigar with a knife?

In a pinch, yes. Though, knives serve to be more regular than cigar cutters and can end up picking the tobacco rather than slicing it neatly. This can let irregular smoke.

Q: How long do cigar cutters serve?

If you are a daily cigar smoker, think to get your pricier cutter sharpened once a year or more if required. Less costly cigar cutters typically last about that long and can be quickly reinstated.

Our Guidelines for Picking the Cigar Cutter

We viewed at a kind of test when we were viewing our cigar cutters, including price, size, function, and further cut type. At the end of the day, you must receive a cutter that fits your requirements and is built to last. How will you use it? You can get a quite excellent, quality guillotine cutter for under $10 and further spend upwards of $100 – it all depends on what you need.

---

	Product	Manufacturer	Shop
	ALASKA BEAR® - Cigar Cutter Stainless Steel Guillotine	ALASKA BEAR
	Colibri V-Cut Cigar Cutter - Black	Colibri
	Cigar Cutter Stainless Steel Guillotine Smooth Double-Cut Blade	Anntuk
	Vertigo Victory V-Cut Cutter	Vertigo
	Blinkeen® Cigar Cutter-Stainless Steel and Kirsite Cigar Cutters-Double Blade Guillotine	BLINKEEN
	2020 Cigar Cutter Built-in Two Cigar Punch	Camlinbo
	OYHBO Cigar Cutter Stainless Steel Guillotine Style	OYHBO
	Quality Importers Trading Co. Quad Table Cigar Cutter	Quality Importers
	CIGARLOONG Cigar Cutter	C CIGARLOONG CIGARLOONG
	CIGARLOONG Cigar Cutter Stainless Steel	C CIGARLOONG CIGARLOONG

---

Disclaimer

“All brand names and images are Registered Trademarks of their respective companies. All manufacturers names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.”

---